Plantronics Discovery 975 Manual Del Usuario página 6

Pairing Your Earpiece
How to Pair Your Phone with Your Earpiece
for the First time
1
Turn on the Bluetooth feature on your phone.
2
Turn the earpiece on.
Press and hold the call control button until the
indicator flashes red/white.
3
Use the commands on your phone to
locate and select your earpiece.
9xxPlantronics.
4
If prompted for the PIN code or Passkey,
enter 0000.
Pairing is successful when the indicator on
your earpiece flashes white.
6
Adjusting the Fit
For optimal voice clarity, point the boom towards
the corner of your mouth. The eartip can also
be rotated on speaker housing to better fit the
contours of your ear. If the earpiece still feels
unstable, then change the eartip to a different size.
How to Install a Different Gel Eartip
1
To remove the eartip, gently pull the
stabilizer loop of eartip off of the speaker
housing.
2
To fit a new eartip, position the eartip over
the speaker housing and gently press
down on the eartip.
Action
Turn on the Press the call control button
earpiece for 2 seconds.
Turn off the Press the call control button
earpiece for 4 seconds.
Answer a call Tap the call control button once.
NOTE Wait until you hear the ring in your earpiece to answer the call.
End a call Tap the call control button once.
Make a call Enter the phone number on your
phone and press send. The call
automatically transfers to your
paired and connected earpiece.
Transfer a call While on a call, press the call
between earpiece control button for 2 seconds.
and phone
dUrATIon: TAP is under 1 second. PRESS is 1-4 seconds as directed.
Earpiece Controls and Indicators
Light tone
Glows white. 4 ascending tones.
Glows red. 4 descending tones.
Flashes white. Single low tone followed by
low-low-high tones.
1 white flash. 1 low tone.
None Single low tone followed by
low-low-high tones.
None Single low tone followed by
double low tone.
7