Device Elements; Start Up - Kärcher SB VC 1 Manual De Instrucciones

Device elements

1 Filter dedusting
2 Flat fold filter
3 Power cord
4 Indicator lamp
5 Automatic filter dedusting switch
ATTENTION
The device may only be operated by
trained specialist personnel.
The flat pleated filter must always be in
place while vacuuming.
Note
The suction hose is in the dirt receptacle.
Suction hose installation
1 Hose coupling
2 Threaded bush
3 Clamp ring
4 Fibreglass rod
5 Double casing suction hose
6 Guide hose
 Mount the clamp ring, threaded bush
and hose coupling on the double casing
suction hose.
 Insert the fibreglass rod in the guide
hose and thread through the hose cou-
pling.
22

Start up

1 Suction connection
2 Washer ring
3 Snap ring
4 Double casing suction hose
5 Sponge rubber seal
 Push the sponge rubber seal over the
double casing suction hose to just be-
fore the dual channel.
 Guide the double casing suction hose
through the suction hose intake.
 Mount the snap ring, washer ring and
suction connection on the double cas-
ing suction hose.
 Connect the suction connection to the
intermediate ring.
 Before closing the door, the suction
hose must be pushed in between both
suction vacuum cleaners in order to be
able to shut the door.
– 3
EN