Publicidad
When used together, the C1 and C2 buttons of Force Pro are replaced by the two operating mode buttons of the
Thumb Controller.
The thumb controller can be used to control the gimbal when Force Pro is in sleep mode.
Updating Firmware
Remove the communication cable from the Thumb Controller and connect it to your computer using the USB-C port
before updating the firmware. Use the DJI Pro Assistant for Ronin software to complete the update.
Download the DJI Pro Assistant for Ronin software at https://www.dji.com/ronin-2/info#downloads
Specifications
Model
Supported Device
Consumption
Operating Voltage
Operation Temperature
Weight
Dimensions
Please refer to http://www.dji.com/service for after-sales service for your product where applicable.
DJI OSMO shall mean SZ DJI OSMO TECHNOLOGY CO., LTD. and/or its affiliated companies where applicable.
2
1
R2THC
Ronin 2
<0.5 W
5-17 V
-4 to 113° F (-20 to 45° C)
Approx. 182.5 g
71×43×43 mm
USB-C Port
5
Publicidad
