VONROC WL501DC Traducción Del Manual Original página 5

The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC POWER 20V battery
platform are interchangeable with all the VONROC
POWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. On/Off switch
2. Lamp head
3. Lens plate
4. Carrying handle
5. Battery unlock button
6. Battery (not included)
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first
use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (6) into the base of the machi-
ne as shown in Fig. B.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (5)
2. Pull the battery out of the machine like shown
in Fig. B.
4. OPERATION
On/Off switch (Fig. A)
• Press the on/off switch (1) once to turn the
work light on.
• Press the on/off switch (1) again to turn the
work light off.
WWW.VONROC.COM
Pivoting head (Fig. C)
The pivoting head (2) can be positioned within a
range of 128º as desired by swiveling it up or
down.
Setting the angle of diffusion (Fig. D)
You can set the angle of diffusion by turning the
lens plate (3) to one of 2 positions.
Carrying handle (Fig. E)
The cordless work light can be carried or fastened
to an object with the carrying handle (4).
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re-
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
EN
5