Overspill Flange
6031116
pressure regulator
7030783
air Filter
7030784
air Compressor
7030804
aluminum Oxide
teMperature COntrOller, tC-8D
A P.I.D. micro-processor temperature controller, which bypasses the energy regulator, should be used
when specific temperatures are required for laboratory and industrial applications. Model TC-8D comes
with a type K thermocouple (6009929) which fits into the sheath built into the SB series baths.
The unit is available in degrees C or F calibration.
It provides:
1) Precise Temperature Setting.
2) Improved Temperature Stability.
3) Stable Temperature Under Varying Loads.
tC-8D Features
• Compact design, overall size 5.6 x 6.6 x 8.6 inches.
• Accepts mains voltage input of 80 to 260VAC *.
• Digital display of process temperature.
• Digital display of set point temperature.
• Three pole twist lock plug provided for fitting into outlet receptacle on rear of unit.
• Two ranges – 32/1166°F or 0/630°C.
3011900 – TC-8D Controller Degrees F
3012000 – TC-8D Controller Degrees C
TC-8D can be used with all models listed in this instruction manual.
* Note mains voltage input to TC-8D must match voltage of the SBS bath under use.
aCCeSSOrIeS
(Supplied as standard with fluidized bath.) Fits into the top of the inner
container of the fluidized bath, having the effect of widening the top of the
bath, avoiding spillage of the medium when the bed nears the top of the
bath.
For models SBS-2 and SBS-4
Reduces the pressure of air from air line to suit the fluidized bath. The
regulator is supplied with a pressure gauge.
For all 117V models (inquire about availability for 240V)
For providing uncontaminated air to the fluidized bath. This filter is
recommended for use with regulator 7030783.
For all models
For those who do not have an air line, this oil less unit with self Lubrication
carbon vanes provides the proper air supply to fluidized SB series baths.
For all models
7030462 20 lb. aluminum oxide
7030463 34 lb. aluminum oxide
7030464 100 lb. aluminum oxide
23