Descargar Imprimir esta página

GE 106670 Guia Del Usuario página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly: Head
Place head assembly onto notched
end of tube without connector . Align
snap area on rear of head assembly
collar with the notch and catch on
tube. Slide the head assembly down
onto tube and press down firmly. You
will feel a definite click when seated
properly, and the head assembly will
not turn.
Assembly: Blade & Grill
rear
blade
grill
fan
spinner
plastic nut
1. Tilt fan head back.
Put rear grill on motor.
pin
groove
3. Slide blade onto motor shaft.
(Align groove on blade hub with
pin on motor shaft.)
To secure blade, screw
fan spinner onto shaft
counter clockwise until
tight on blade hub.
ornament
front grill
g
snaps
tab
notch
tab
5. With fan head in upright position, align ornament of front grill so it is
horizontal. Insert bottom of front grill into plastic rear grill. Tab at the
bottom of plastic rear grill should fit over notch on front grill. Snap
front grill into rear grill beginning at the bottom and working up both
sides. Note: No grill clips are needed for assembly.
106670
New 3/01 2085341 Printed in USA
head assembly
snap
notched
tube without
end
connector
rear grill
motor
2. Align triangular "∆" cut in the rear grill
with triangular post on top of front
motor cover. Fully seat rear grill and se-
cure with plastic nut, turning clockwise.
ornament
slots
4. Install ornament into front grill.
Insert tabs into rectangular slots.
Snap into place.
g
tab
Operation
Oscillation: Push down oscillation knob on
motor housing to make fan head move from side
to side.
Tilting: This fan is equipped with a multi-angle fan
head for whole-room air circulation. To properly
adjust the "tilt angle" of your fan:
1. Place one hand on the pole just under the fan
neck.
2. Place other hand on top of fan.
3. Gently push or pull the fan head until it is in
the desired position.
Note: The ratchet assembly on the 16" Deluxe Ped-
estal Fan with thermostat is designed for positive
lock positioning. Therefore, when adjusting the fan
angle, you will hear a clicking sound. This is normal.
Speed: Control fan speed with fan speed dial at far right of body.
Thermostat: Adjust the thermostat dial so that the fan cools to a comfortable
level. The 16" Deluxe Pedestal Fan thermostat will automatically turn the fan off
and on as the room temperature changes.
less light: warmer
more light: cooler
tabs
snaps
Down: Oscillate
16" Deluxe Pedestal Fan
thermostat dial
fan speed dial
(lighted number indicates fan speed)
g
is a trademark of the General Electric
Company used under license by
Wal-Mart Stores, Inc., Bentonville, AR.
Up: Stationary
2

Publicidad

loading