Steren LIM-915 Manual De Instrucciones página 14

If you want to repair a CD: :
1.- Place repairing pads (yellow color) into the left and right side of the
mounting shaft.
2.- Add 2 small drops of repairing fluid on the right side of repairing pad Add 2 small drops of repairing fluid on the right side of repairing pad
3 .- Insert a CD with the silkscreen upwards.
4 .- Press the power button to start repairing up the CD.
5 .- When the process is completed automatically repair kit will stop.
6 .- If you are not satisfied with the result, repeat the repairing process
(step 2 to 4) until you get the best results. If the results of disc repairing
aren´t replace and use buffing pads (see next section)
If you want to buffing a CD� :
1.- Place buffing pads (pink color) into the left and right side of the
mounting shaft.
2.- Add 2 small drops of repairing fluid on the right side of repairing pad Add 2 small drops of repairing fluid on the right side of repairing pad
3 .- Insert a CD with the silkscreen upwards.
4 .- Press the power button to start buffing up the CD.
5 .- When the process is completed automatically repair kit will stop.
6.- Use the mini brush to remove dust.
7 .- If you are not satisfied with the result, repeat the buffing process
(step 2 to 4) until you get the best results.
ENGLISH-06