Technical Specifications - GYS G9 Manual De Instrucciones

TECHNICAL SPECIFICATIONS

Copper arm
Part number
Effort (8 bars)
Length
Opening
Over-opening (centre electrodes)
Electrode types
WARNINGS
- Before use in welding, all three arm configurations must be available on the spotter display:
- G9-X1 ;
- G9-X2 ;
- G9-X6.
- An update of the machine software is required for «G» Spot Welders made before November 2019.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
G9 ARM
X1
115
120
050501
550 daN
(1237 Lbf)
140 mm
(5,52 inch)
115 mm
(4,53 inch)
30 mm
(1,19 inch)
Type A
049987
X2 X6
115
89
223
25
050518 050587
300 daN 300 daN
(675 Lbf) (675 Lbf)
240 mm 240 mm
(9,45 inch) (9,45 inch)
115 mm 115 mm
(4,53 inch) (4,53 inch)
55 mm 55 mm
(2,17 inch) (2,17 inch)
Type C Type A
049994 049987
EN
220
13