Dismantling And Recycling - GYS 061385 Manual De Instrucciones

Translation of the original instructions
13
14
Perform a static loading test: maximum load + safety factor (load x 1.. 5) - (for the test, position the trolley in the
middle of the column and place the load centred between the rollers for at least 10 minutes).

DISMANTLING AND RECYCLING

To remove the wheel lift, refer to the «Mounting» section and perform the exact reverse operation.
For recycling, handle the wheel lift to a specialised waste company to ensure the recycling of the different parts.
APPLICATION AND USE
Winch
The wheel lift is equipped with a winch that allows the trolley to go up or down. To mount the trolley, simply turn the
crank clockwise. The movement in the opposite direction allows the trolley to be lowered. The winch is equipped with
a self-locking brake that allows the trolley with the wheel to be held at a certain height without it going down.
Be careful, giving abnormal blows in the crank handle is likely to unlock the brake.
Strap
The winch wheel lift is equipped with a strap to prevent the wheel from tipping over when moving. Simply pass the
looped strap over the wheel and adjust the tightening if necessary.
Brake
The manual winch wheel lift is equipped with individual brakes on each of the two rear wheels. To operate them,
press down on the brake of each wheel using your foot.
SAFETY
- The user must use the personal safety equipment in force (safety shoes, gloves, etc.).
- The indicated maximum load must not be exceeded.
- The wheel lift must not be used to lift people.
- The wheel lift must be stored in a place protected from moisture.
- During transport the wheel lift must be packed in such a way that it does not risk tipping over.
MANUAL WHEEL LIFT
1
1- Screw the handles onto the column.
1- Add the strap
EN
11