Zolia ZD-90 Manual De Instrucciones página 10

Press and hold (for 2 seconds) the SET key until Digit-3 & 4 start flashing. ​ T he display will show the 1 ​
2.
time. Example: ​ ( 1 07)=(1st feeding at 7am)
3. Press the TIMER key to set the desired HOUR for feeding. Note the (P) in the top left corner for PM using 12
hour time
4. Press the SET key to confirm your setting and proceed to the 2​
5. Repeat step-3 to set the desired hour for feeding the SECOND feeding time
At this point if you want to only feed 2 times per day Press the START key and your finished. ​ T he last
6.
feeding-number shown is the number of times to feed per day..The timer will now automatically start and the
TIMER icon will turn ON.
7. If you wish to feed a 3​
Tip: If you pressed the SET key a 3​
TIMER key and then press and hold the SET key (for 2 seconds) to start over, remember not to press the SET
key after the second feeding, press the START
Note:
1. If all four feeding-times have been set, the process will terminate and the schedule will start automatically. The
next feeding time will then be displayed. (If only 1 feeding-time has been set then the feeding-timer display will
not change even if you press the TIMER key.)
2. Feeding-times must be set in ascending order otherwise the remaining number of the feeding(s) will not be
served.
Setting the Volume/Portion-Size
1. Press the VOL key to display feed-volume/portion-size
2. Press and hold (for 2 seconds) the SET key until Digit-4 flashes
3. Press the VOL key to set the desired volume/portion-size
Note:
A. A Feed-volume of 1 equals ¼ cup (60cc) of food, 2 means ½ cup (120cc) of food, 3= ¾ cups (180cc) and so on.
B. The number 0 represents 10 portions which is equal to 2.5 cups ( liters).
4. Press the START key to confirm the volume setup
Setting the Number of Days to Feed
1. Press the DAY key and the left side of the LCD shows the number of days your
will feed for until it stops. The default setting of (0) means the feeder will feed continuously and never stop
2. To change the number of days to feed, press the DAY key then press and hold the SET
until the days flash on the LCD
3. Press the DAY key to change the number of days. Hold down the DAY key to speed through the numbers
4. If you set a number of days to feed (1 to 99 days) then at 6am after the last day the feeder Alarm will start
beeping
5. To repeat the same schedule without any changes, just press the START key
6. To feed continuously, set the number-of-days to 0
Note:
A. When the timer-icon and all the numbers on the LCD display are continuously ON, the feeding schedule has
started.
B. Once a feeding schedule has started, you can force it to end by pressing the SET and START keys together.
Record Voice Message to be played at feeding times
1. Press and hold the REC key, the Red LED will turn on
2. Speak your message. You have up to 6 seconds
3. When finished, release the REC key
Play back recorded Voice Message
1. Press the PLAY key
2. Your recorded message will now play
3. At each Feeding your recorded message will play and repeat 3 times
Feeding Alarm
1. Your ZD90 Automatic Pet Feeder has an ALARM (​ a continuous beeping ​ ) to alert you to when your feeding
schedule has ended and no more food will be dispensed
2. The Feeding Alarm will start at 6:00AM the next day to avoid disturbing anyone during the night
3. You can press any key to stop the alarm
4. To restart your original feeding schedule, press the START
To manually feed your pet
1. Press the SET and VOL keys together, once. ​ O nly ¼ cup (60cc) will be dispensed. The normal schedule and
rd​ th​
or 4​ time each day do NOT press the START key and repeat from step-3
rd​
time, but you did not want to feed 3 times per day, just press the
nd​
feeding time
key to end your number of feedings per day.
key
9
st ​
feeding
Automatic Feeder
key (for 2 seconds)