Safety Instructions - Toparc 060692 Manual De Instrucciones

Translation of the original instructions

SAFETY INSTRUCTIONS

This manual includes guidelines on the operation of your device and the precautions to follow for
your own safety. Ensure it is read carefully before first use and keep it handy for future reference.
These instructions should be read and understood before anyone operates the product. Any modifi-
cations or maintenance that are not specified in the manual should not be undertaken. The manu-
facturer is not liable for any injury or damage due to non-compliance with the instruction manual. In
case of problems or uncertainties, please consult a qualified person that is able to handle the device
correctly. This device should only be used within the limits indicated on the device and in the ma-
nual. The safety instructions must be followed. In case of improper or unsafe use, the manufacturer
cannot be held responsible
Device suitable for indoor use only. Do not expose to rain or excessive moisture.
This device may be used by children from age 8 and by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, provided that they are under supervision or
have been told how to use the device safely and are aware of the potential risks. Children must not
use the device as a plaything. Cleaning and servicing tasks may not be carried out by children unless
they are supervised.
Do not operate the device with a damaged power supply cord or a damaged mains plug.
Do not cover the device
Do not place the device near a fire or subject it to heat or to longterm temperatures exceeding 50°C
Connection:
• This device must be connected to an earthed power supply
• This equipment is intended for industrial environments (class A) and not for residential sites where
the electric current is supplied by the public low-voltage power supply network. There may be po-
tential difficulties in ensuring electromagnetic compatibility on these sites, because of the conduc-
ted interferences, as well as radiated radioelectrical frequency.
Maintenance:
• If the power supply cable is damaged, it must only be replaced by a cable specified or supplied by
the manufacturer or its after-sales service.
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall socket before carrying out any work on the
device.
• Under no circumstances should solvents or other aggressive cleaning agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Hot areas
• When a LED is on, the electrode oven is heating up at the requesting temperature. The external
metal case is also getting very hot. Please do not touch it to avoid burns.
Regulations
Device complies with europeans directives, The EU declaration of conformity is available on our
website (see cover page).
Equipment in compliance with British requirements. The British Declaration of Conformity is avai-
lable on our website (see home page).
Equipment in conformity with Moroccan standards. The declaration C‫( م‬CMIM) of conformity is
available on our website (see cover page).
Disposal:
• This product should be disposed of at an appropriate recycling facility. Do not dispose of in do-
mestic waste.
ELECTRODE OVEN EN
5