ACM-100 BUILD-IN MULTI DIMMER
EN
Read these simple instructions in order to avoid incorrect use and prevent dangerous situations. Incorrect installation voids
the guarantee for this product.
DESCRIPTION
You can use this invisible-mount wireless dimmer to dim the lights. The receiver can be neatly mounted in an
existing flush-fit enclosure (wall/ceiling) or a splash-proof flush-fit enclosure (OWH-001) and can be operated via
any Trust SmartHome transmitter (up to a maximum of six transmitters per dimmer).
COMPATIBILITY
This receiver is compatible with all
Trust SmartHome transmitters.
TECHNICAL DATA
• Power supply
• Maximum load
• RF frequency
• RF reception range
• Memory addresses
• Stand-by power consumption
RECOMMENDED BULBS (refer to www.trustsmarthome.com for more information)
R Incandescent bulbs
R Eco halogen bulbs
R 230V halogen bulbs
R 12 V halogen bulbs with electronic transformer
R 12 V halogen bulbs with ring core/coil transformer
WIRELESS SIGNAL
• The 433.92 MHz radio signal penetrates walls, windows and doors.
• Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimum conditions)
• The range depends on local conditions such as the presence of metals and other interference sources. For example, the
metal particles in double glazing (HR glazing)
• Limitations may apply to the use of this device outside the EU. If this device is used outside the EU, you must check
whether the device complies with local guidelines.
1
220-240 VAC 50 Hz
50 watt (dimmable LED and energy-saving bulbs) 200 watt
(incandescent bulbs and (eco) halogen)
433.92 MHz
Up to 30 m indoors, up to 70 m outdoors (optimum conditions)
6
< 1 watt
reduce the wireless range of Trust SmartHome transmitters.
FUNCTION
On/off + dim function in combination with
Trust SmartHome transmitter. The connected
lighting must be suitable for dimming.
R Dimmable energy-saving bulbs
R Dimmable LED bulbs
Connect no more than 1 transformer for
each receiver