Proper Installation; When Not In Use - GE WCVH4800K Manual Del Propietário

PROPER INSTALLATION

This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling
800.GE.CARES (800.432.2737).
Ensure that the hot water hose is connected to the "H"
(internal red screened) valve and the cold water hose is
connected to the "C" (internal blue screened) valve.
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate
the warranty.
Properly ground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
WARNING
Plug into a grounded 3 prong outlet.
DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to do so can result in death, fire or electrical
shock.

WHEN NOT IN USE

Turn off water faucets to minimize leakage if a break
or rupture should occur. Check the condition of the fill
hoses; GE recommends changing the hoses every 5
years.
* Tide ® is a registered trademark of Procter & Gamble
- Electrical Shock Hazard
GE strongly recommends the use of new water
supply hoses. Hoses degrade over time and need to
be replaced every 5 years to reduce the risk of hose
failures and water damage.
Parts and Accessories
Order on-line at GEApplianceparts.com today, 24 hours a
day or by phone at 800.626.2002 during normal business
hours.
Part Number Accessory
PM14X10002 4 ft Rubber Water Supply Hoses
Or
PM14X10005 4 ft Braided Metal Water Supply Hoses
®
WX10X10011 Tide Washing Machine Cleaner*
WX7X1 Washer Floor Tray
SAVE THESE INSTRUCTIONS
GEAppliances.com
3