Ec Declaration Of Conformity - BTI A18 RADIO Manual Original

MAINTENANCE
If the supply cord of this appliance is damaged, it must only be replaced by a
repair shop appointed by the manufacturer, to avoid hazardous situations.
Use only BTI accessories and spare parts. Components whose replacement
has not been described, can be exchanged at the BTI after sales service. (BTI
Befestigungstechnik GmbH & Co. KG · After Sales Service · Salt Road 51 ·
74653 Ingelfi ngen · Tel 07940 / 141-870, -872, -873 or -886 · Fax 07940 /
141-875).
If needed, an exploded view of the tool can be ordered. Please state the
ten-digit No. as well as the machine type printed on the label and download the
drawing at BTI Homepage www.bti.de > Service > Explosionszeichnungen und
Ersatzteillisten > BTI > Akku-Geräte or order directly at BTI Befestigungstechnik
GmbH & Co. KG, After Sales Service, Salzstraße 51, 74653 Ingelfi ngen.
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before carrying
out any work on the machine.
Please read the instructions carefully before starting the
machine.
Do not dispose of electric tools together with household
waste material! In observance of European Directive
2002/96/EC on waste electrical and electronic equipment
and its implementation in accordance with national law,
electric tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Class II tool, tool in which protection against electric shock
does not rely on basic insulation only, but in which additional
safety precautions, such as double insulation or reinforced
insulation, are provided.
There being no provision for protective earthing or reliance
upon installation conditions.
This tool is only suitable for indoor use. Never expose tool to
rain.
Do not burn used battery packs.
Never charge a damaged battery pack. Replace by a new
one.
European Conformity Mark
457 123 - BTI - A18 RADIO.indd 21 457 123 - BTI - A18 RADIO.indd 21
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described under
Technical Data fulfi lls all the relevant provisions of the directives 2011/65/EU
(RoHs), 2014/53/EU and the following harmonized standards have been used:
EN 60065:2014
EN 55032:2015
EN 55020:2007+A11:2011+A12:2016
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62311:2008
EN Final draft 303 345 V1.1.7 (2017-03)
EN 50581:2012
The notifi ed body SGS UNITED KINGDOM LIMITED [0890] performed the
EU-type examination and issued the EU-type examination certifi cate:
233061/121/GZ
Ingelfi ngen, 2017-06-09
Andreas Krebs
Geschäftsführung
Authorized to compile the technical fi le
BTI Befestigungstechnik GmbH & Co. KG
Salzstraße 51
D-74653 Ingelfi ngen
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before being
dispatched from the manufacturing plant. If, despite this fact, there are any
defects, please send the item directly to our Client Services Headquarters or to
the nearest service repair shop of the firm BTI.
BTI after sales service can be reached at the following contact information: BTI
Befestigungstechnik GmbH & Co. KG · After Sales Service · Salz Straße 51 ·
74653 Ingelfi ngen · Tel 07940/141 - 874 · Fax 07940 / 141-9874.
The warranty period of 36 months for tools and 12 months for batteries and
chargers starts on the date of purchase which must be verifi ed using the original
receipt. During the guarantee period the producer guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or manufacturing
fault. Defects or faults caused by incorrect treatment or excessive force are not
covered by the warranty. Furthermore, only original accessory parts may be
used, which BTI has expressly identifi ed as suitable for the operation with BTI
machines.
You can fi nd out the location of your nearest customer service workshop in the
address list at the back of this document.
21
Stefan Haug
Anwendungstechnik
ENGLISH
30.06.2017 16:57:37 30.06.2017 16:57:37