General Safety Rules - BTI 220 Manual Del Usuario

English
Your BTI drill stand (X) is a device that must be used together with a suitable core drill
motor (Z) and a suitable anchoring system (Y), according to the directions given in this
user manual. These three elements (X+Y+Z) make a core drill that is suitable to drill into
stone-like materials (bricks, stone, concrete...), using a proper diamond core bit. Your drill
stand conforms with regulations related to core drills if used within the limits defined in
this user manual.
Warning! Ensure that every element of your core drill is suitable for the hole you
want to drill, in terms of drilling depth and diameter in relation with the material
to be drilled. If in doubt, consult your dealer.

General safety Rules

WARNING! Read the fol l owi ng safety instructions
before attempting to operate this product.
KEEP THESE INSTRUCTIONS!
Read the safety instructions provided by the
core drill motor manufacturer and by the
anchoring system
attempting to operate this product.
a) Keep work area clean. Cluttered areas and benches
can cause accidents.
b) Keep children away. Do not let children come into
contact with the tool or its attachments. Keep all
people away from the work area.
c) Dress properly. Do not wear loose clothing or
jewellery. They can be caught in moving parts.
Preferably wear rubber gloves and non-slip footwear
when working outdoors.
covering to keep long hair out of the way.
d) Wear safety goggles. Also use a face or dust
mask in case the operations produce dust or flying
particles.
e) Beware of maximum
appropriate measures for the protection of hearing if
the sound pressure of 85 dB is exceeded.
f) Stay alert. Watch what you are doing. Use common
sense. Do not operate the tool when you are tired.
g) Use appropriate tool. The intended use is laid down
in this instruction manual. Do not force small tools or
attachments to do the job of a heavy-duty tool. The
tool will do the job better and safer at the rate for
which fit was intended. The use of any accessory or
attachment or performance of any operation with this
tool, other than those
instruction manual may present a risk of personal
injury.
h) Have your Power Tool Attachment repaired by an
authorized BTI repair agent.
manufacturer before
Wear protective hair
sound pressure. Take
recommended in this
Additional safety rules for diamond core drills
Always
wear safety
goggles
Always
wear safety
shoes
Instructions
Read carefully the data written on the Technical
Data sheet that you will find in the package
together with your product.
In the following text, figures are identified by numbers,
details inside the figures by letters. Figures are depicted on
the first pages of this user manual.
The drill stand
Your drill stand is made up of the following parts. Refer to
figures 2 and 3.
a base (A). This part allows you to fasten the drill
stand on a surface. The following paragraph shows
different ways to fasten your drill stand;
a column (B). The column is equipped with a rack
that allows the carriage movement;
a carriage (C). The carriage is the part of the drill
stand that can move and to which you mount the
core drill motor. The feed handle (E) must be
mounted to the carriage in order to move it;
two holding bars (D). They are designed to hold the
column, decreasing its vibration. The holding bars
can be optional in some rig stand types;
system for scaffold pipe fastening (F), available only
for some rig stand types.
cerca centro – guida corona (G). Permette di
stabilire con precisione il centro del foro e di
guidare la corona nelle fasi di inizio carotaggio.
Drill stand fastening
Warning: for your safety, make always sure
that the stand is securely fastened before
stating to drill.
Warning: always determine where the core drill
can drop off in case something goes wrong with
drilling. Do not stay in this area and do not
allow anybody to stay there. This is particularly
6
Always Always wear
wear safety ear
gloves protection
Always
wear dust
mask