Publicidad
Trouble
It cannot establish the connection with
the receiver or the tones are weak
The transmitter does not detects
the signal in the telecommunication
equipment
Wrong results in the cable mapping
The NCV function does'not works
Solution
· Check that the volume control in the
receiver is in right position.
· Review the batteries status (in both
devices) if is necessary change it.
· Ensure that the switch in the recei-
ver is in the "SCAN" or "LED"position.
· Maybe there is conflict between the
phone line signal and the transmitter
signal. Restart your device.
· Ensure that the connectors are
RJ45/RJ11 and the cables are con-
nected correctly.
· If the LED indicators don't works,
probably are damaged, refers to an
authorized dealer to make a revision
of the equipment.
· Check that the switch is in the
correct position.
· Press and hold the SCAN button
while you search.
· Review the battery status.
35
Publicidad
