Identification Of Symbols; Know Your Product - Flymo C-Li 20VB Manual Del Usuario

• WARNING! This power tool can be dangerous! Careless
or incorrect use can result in serious or fatal injury to the
operator or others. (Picture 1)
• Please read the operator's manual carefully and make
sure you understand the instructions before using the
product. (Picture 2)
• Always wear approved eye protection. (Picture 3)
• Wear hearing protection that provides adequate noise
reduction. (Picture 4)
• Remove the battery pack before you do maintenance.
(Picture 5)
• Do not expose to rain. (Picture 6)
• Do not wear jewelry, loose clothing, or clothing with
loosely hanging straps, ties, tassels, etc. They can be
caught in moving parts. (Picture 7)
See Picture 15
1. Powerhead
2. Trigger
3. Trigger lockout
4. Handle
5. Attachment release button
6. Blower midsection
7. Blower nozzle
IMPORTANT • READ CAREFULLY BEFORE USE • KEEP FOR FUTURE REFERENCE
GENERAL POWER TOOL SAFETY WARNINGS
a WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk
of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.

IDENTIFICATION OF SYMBOLS

KNOW YOUR PRODUCT

SAFETY
• Always wear heavy, long pants, long sleeves, boots, and
gloves. (Picture 8)
• Secure hair above shoulder length. (Picture 9)
• The product or packaging cannot be handled as
domestic waste. The product and packaging must be
submitted to an appropriate recycling station for the
recovery of electrical and electronic equipment. (Picture
10)
• Guaranteed sound power level. (Picture 11)
• The product agrees with the applicable EC directives.
(Picture 12)
• Material may ricochet back toward the operator. (Picture
13)
• Keep children, pets and bystanders at a safe distance
when using your product. (Picture 14)
8. Battery pack
9. Charger
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
infl uence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your fi nger on the
switch or energising power tools that have the switch on
invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
3