Digital Display - Sunbeam 0168 Modo De Empleo

DIGITAL DISPLAY

TIME DISPLAY MODE
The LED display is designed to show by default the time. From the left, the first two digits display the HOUR, the next two digits display the
MINUTES and the last two digits display the
HOW TO SET PRESENT TIME
• Press TIME button to enter Time Setting Program Mode. On the LED display the first two digits on the left side, indicating the Hour, will start flashing.
• Pressing the Adjust button the number on the flashing digits will increase. Keep the Adjust button pressed until the correct hour is displayed.
• Press the TIME button again to set up the Minutes. On the LED display the third and fourth digits from the left side, indicating the minutes, will start flashing.
• Pressing the ADJUST button the number on the flashing digits will increase. Keep the ADJUST button pressed until the right minute is displayed.
• Press the TIME button again to set up the Seconds. On the LED display the sixth and seventh digits from the left side, indicating the seconds, will start flashing.
• Pressing the ADJUST button the number on the flashing digits will increase. Keep the ADJUST button pressed until the right second is displayed.
• Press TIME button to set the new time and exit Time Setting Progra m .
• To return to the clock display, press the clock button.
T E M P E R ATURE DISPLAY MODE
• Press Temperature button once to enter Temperature Display Mode. The LED display will show the temperature of the COLD WATER and
HOT WATER in degrees Fahrenheit (default).
• To switch back and forth from degrees Fahrenheit to Celsius temperature display, while being in Temperature Display Mode or
Temperature Setting Mode, press ADJUST button and TEMPERATURE Mode simultaneously for 5 seconds.
HOW TO SET THE TEMPERAT U R E S
• Press Te m p e rature button one time to enter Te m p e rature Display Mode and a second time to enter Te m p e rature Setting Program Mode. On the LED
display the actual temperature settings will be displayed and, the first two digits on the left side, indicating the COLD WAT E R , will start flashing.
• Pressing the ADJUST button the number on the flashing digits will increase. Keep the ADJUST button pressed until the desired temperature is
d i s p l a y e d . The range is approximately between 41°F (5°C) to 50°F (10°C).
• Press the temperature button again to setup the COOLING COMPA RT M E N T t e m p e ra t u r e. On the LED display the third and fourth digit from the left
side (indicating the cooling compartment temperature) will be flashing.
• Pressing the ADJUST button, the number on the flashing digits will increase. Keep the ADJUST button pressed until the desired temperature is
d i s p l a y e d . The range is approximately between 32°F (0°C) to 50°F (10°C).
• Press the Te m p e rature button again to set up the HOT WAT E R . On the LED display in fahrenheit, the fifth, sixth and seventh digits from the left side,
indicating the hot water tempera t u r e, will start flashing.
• Pressing the ADJUST button the number on the flashing digits will increase. Keep the ADJUST button pressed until the desired temperature is
d i s p l a y e d . The range is approximately between 158°F (70°C) to 194°F (90°C). Once you reach 194°F (90°C) you now have the option of turning
the hot water to " O F F " . You must press the button again in order to start the process again. * Wa rning: Once 'off' option has been selected,
any hot water left in the hot water tank will remain hot for 2 to 3 hours.
• Press T E M P E R ATURE button to set and exit Te m p e rature Setting Progra m . Now the temperatures of the COLD WAT E R , COOLING COMPA RT M E N T
and HOT WATER are set.
• To return to the clock display, press the clock button.
Note: There may be a small temperature diff e rence between the digital display and the actual temperature of the water.
LED DISPLAY
M S
H
Time:
Temp:
C O L D
H O T
WA T E R WA T E R
C O O L I N G
C O M PA RT M E N T
SECONDS.
- 5 -
No. 0168/0169
TIME ADJUST TEMP