Stay-Open Feature
IMPORTANT: Stay-Open Feature should be used only by adults, because the auto-close feature will be disabled,
allowing children to freely pass through the gate.
• To make use of the Stay-Open Feature, simply swing the door slightly past 90 degrees open in either
direction. The door will remain open until it is swung closed.
Troubleshooting:
If the gate does not remain closed, the locking handle is too close to the corner of the locking housing.
This can be corrected by loosening the upper tension knobs by turning them outward, creating the
proper distance, as described in step 4 /Figure 4D.
If the gate does not remain in its opening, it was not installed properly. Remove and reinstall the gate,
Care:
CLEANING: Clean the safety gate using warm water and a mild detergent. Use a soft cloth or sponge to
avoid scratches. Never use solvents or chemicals to clean the safety gate.
Rev 03/2017
Swing to the open positions
Distributed in the United States by
North States Industries, Inc.
5455 Highway 169 N
Plymouth, MN 55442
www.northstatesind.com
Manufactured in Guang Dong, China
Page 5