STEP 5
Place the tube with the hinge knob on it into
the hole in the bottom of the extension gate.
Slide the tube into place and screw the hinge
knob in the counter clockwise direction to
tighten. Assembly is now complete.
90 DAYS LIMITED WARRANTY
If, during the first 90 days after consumer purchase of the item,
under reasonable and non-commercial use and conditions of
maintenance, it fails while owned by the original purchaser because
of the quality of materials or workmanship of finish and assembly,
Regalo International, LLC, will replace or repair it at Regalo's option.
PROOF OF PURCHASE REQUIRED.
Gate Operation
STEP 1
UNLOCKED
To open the gate, start with rotating the base
lock in the upward direction. Do this on both
sides of the door.
NOTE:
You can rotate the base lock in
either direction.
STEP 2
LOCKED
Press the release button down on the handle.
Slide the handle back towards the hinge.
NOTE:
Handle is spring loaded and will return to
its "locked" position on its own. When closing the
gate you must do the same operation.
Need More Width?
Please note if your opening is larger than 130" you
can purchase the optional 2 Panel Extension Kit,
model number 0040 W.