Mounting The Ceiling Plate; On The Ceiling Plate - Epson ELPMB30 Manual Del Usuario

Mounting the Ceiling Plate

Warning
Be sure to tighten the screws securely.
After tightening the screws, try re-tightening them once again and make sure that all of them are securely tightened.
Necessary items for the following procedure
Y Ceiling plate
Procedure
To the screen
Route the cables through the
Adjustment dials
center hole of the plates.
Do the same
for the other side.

on the Ceiling Plate

Y M8x10 screws (mm)
A
Engage the screw holes onto the screws on the rear side of
the ceiling plate
Set the ceiling plate
B
Insert the M8x10 screws into the screw holes on the ceiling
plate
To the screen
Y M4x10 screws
(mm; w/ washer)
.
with the adjustment dials to the screen.
and tighten them with the ball point hex wrench.
Y Ball point hex wrench
9