Care And Cleaning; Attachments And Accessories - KENMORE ELITE KKESM600M Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MIXER TIPS AND TECHNIQUES
To help determine the ideal mixing time for a recipe, observe the batter or dough and mix only
until it has the desired appearance described in your recipe, such as "smooth and creamy".
Always add ingredients as close to the side of the bowl as possible, not directly into the moving
beater. When using the splash guard, you can add ingredients into its funnel opening.
When adding Nuts, Raisins or Candied Fruits, follow individual recipes for guidelines about includ-
ing these ingredients. In general, solid materials should be folded in during the last few seconds
of mixing onSpeed 1 (Pulse). The batter should be thick enough to prevent the fruit or nuts from
sinking to the bottom of the pan during baking. Sticky fruits should be dusted with our for better
distribution in the batter.
Mixtures containing large amounts of liquid ingredients should be mixed at lower speeds to avoid
splashing. Increase mixer speed only after the mixture has thickened.

CARE AND CLEANING

WARNING : Injury Hazard: Unplug mixer before touching beaters or
other accessories. Failure to do so can result in broken bones, cuts or bruises.
Always unplug Stand Mixer before cleaning. Do not immerse Mixer in water. The exterior of the
Mixer should only be cleaned with a soft damp cloth.
NOTE : Do not use abrasive cleansers or scouring pads when cleaning your
Stand Mixer. NEVER immerse the body of the Stand Mixer in water or any liquid.
Beaters, Attachments and Bowls should be washed as soon as possible after use to keep food
from drying on them.
Any other servicing should be performed by an authorized service representative.

ATTACHMENTS AND ACCESSORIES

The Kenmore Elite Bowl Lift Stand Mixer's accessories are designed to assure long life. The acces-
sory attachment power shaft and hub socket are of a square design to eliminate any possibility of
slipping during the transmission of power to the accessory. The hub and shaft housing are
tapered to ensure a snug t, even after prolonged use and wear. These accessories require no
extra power unit to operate them. The power is built into the Mixer.
10
NOTES
11

Publicidad

Tabla de contenido
loading

Tabla de contenido