Publicidad
Idiomas disponibles
Idiomas disponibles
Remote LCD (liquid crystal display) Diagram and icons
Your remote pager will indicate the status of your vehicle while in range. The unique LCD design will visually display such icons as lock/unlock status,
remote start confirmation and remaining run-time, impact/shock notification, battery voltage, temperature display and much more.
Alarm
Vibration
Siren
Signal
Shock
Strength
Sensors off
Warn
Battery
Start
Avail
Valet
Turbo
Timer start
Lock
Status
Clock
Aux
Passive
Ign. Con
Temperature
Door Locks
2nd Car
Voltage
By Firstech, LLC
16
Hood
Impact
Door
Parking
Lights
Trunk
Car Call
Arm
Remote LCD (liquid crystal display) Diagram and icons
Lock/Arm – Unlock/Disarm
This icon indicates whether the system is locked/armed or unlocked/disarmed. While armed, the system will monitor the doors, trunk,
hood, shock sensor, and aux inputs. If any of these inputs are triggered while the system is armed, the alarm will be triggered.
Trunk Release
This icon will be displayed when the trunk release function has been activated. By default, the system will be disarmed and the doors will
unlock before the trunk is released.
Signal Strength
This icon is displayed if the last communication to the vehicle was successful.
Valet Mode
This icon will be displayed while you are in Valet mode. While in valet mode, the system will not perform any functions other than lock
and unlock. The alarm will not arm or disarm while locking or unlocking. If any other function is attempted, "Sleep" will be displayed.
The system will not monitor the alarm triggers while in Valet mode.
Battery Indicator
This icon displays the remaining battery life left in 33% increments.
Clock
Displays current time, remote start runtime, turbo mode time remaining, inside temperature of the vehicle, battery voltage of the vehicle,
battery voltage of the remote and failure of signal transfer.
17
By Firstech, LLC
Publicidad
