Sunbeam 300 Guia De Inicio Rapido

Back Contouring Heating Pad
IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY
DANGER:
TO REDUCE RISKS OF BURNS, ELECTRIC
SHOCK, FIRE, AND PERSONAL INJURY, THIS PRODUCT MUST BE
USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.
4. THIS PAD IS NOT TO BE USED ON OR BY AN INVALID,
HELPLESS, A SLEEPING OR UNCONSCIOUS PERSON, A
PERSON WITH DIABETES, OR A PERSON WITH POOR
BLOOD CIRCULATION.
5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
6. BURNS CAN OCCUR REGARDLESS OF HEAT CONTROL
SETTING. CHECK SKIN UNDER PAD FREQUENTLY.
7. NEVER USE PAD WITHOUT COVER IN PLACE.
8. DO NOT USE IN AN OXYGEN ATMOSPHERE.
9. DO NOT USE PINS OR OTHER METALLIC MEANS TO
FASTEN THIS PAD IN PLACE.
10. DO NOT BUNCH, SIT ON OR CRUSH PAD-AVOID SHARP FOLDS.
11. NEVER PULL THIS PAD BY THE SUPPLY CORD.
12. DO NOT USE THE CORD AS A HANDLE.
13. CAREFULLY EXAMINE INNER COVER BEFORE USING.
DISCARD THE PAD IF INNER COVER SHOWS SIGN OF
DETERIORATION.
14. THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT
ADULT SUPERVISION.
15. USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT.
UNPLUG WHEN NOT IN USE.
16. DO NOT TAMPER WITH THIS PAD IN ANY WAY.
17. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY
REASON THIS PAD DOES NOT FUNCTION SATISFACTORILY,
SEE WARRANTY FOR CONSUMER SERVICE INFORMATION.
18. DO NOT USE THIS PAD WITH LINIMENT, SALVE OR
OINTMENT PREPARATIONS, ESPECIALLY ONES THAT
CONTAIN HEAT-PRODUCING INGREDIENTS. SKIN BURNS
COULD RESULT.
19. DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD
IS DAMAGED.
20. NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY
IF CHILDREN ARE PRESENT.
21. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING
MAY DAMAGE CORD AND INTERNAL PARTS.
22. WHEN NOT IN USE, STORE THE HEATING PAD IN THE
ORIGINAL PACKAGING, IN A DARK, COOL, DRY PLACE.
23. SAVE THESE INSTRUCTIONS.
This appliance has a polarized plug (one blade is wider
Than The oTher). To reduce The risk of elecTric shock, This
plug is inTended To fiT in a polarized ouTleT only one way.
if The plug does noT fiT fully in The ouTleT, reverse The
plug. if iT sTill does noT fiT, conTacT a qualified elecTrician
To insTall The proper ouTleT.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR
DEFEAT THIS SAFETY FEATURE IN ANY WAY.
300_BackContouringHeatingPad_IB.indd 1
model: 300
HOW TO USE YOUR BACK CONTOURING HEATING PAD
1. In addition to the therapeutic heat, this pad features a
self-inflatable lumbar support, which can be adjusted for
designed firmness. To INFLATE the pad, open the Air Inlet
Valve (round black knob on side of pad) and the pad will
self inflate automatically. You can regulate the firmness of
the pad by closing the air valve when the pad reaches the
desired thickness. To DEFLATE the pad, open the air inlet
valve and roll up the pad, forcing the air out. The pad can be
stored in this rolled up position.
2. Plug into any 120V AC electrical outlet.
3. Place the pad on a chair or other similar location where you
plan to use it.
NOTE: For optimum heat therapy, ensure that the pad's softer
side with the "Contouring Airflow System" logo is positioned
towards the body. The pad is designed to have the heated
surface only on one side of the pad. Follow the markings on
pad's cover for more direction.
WARNING: Never use this pad without the cloth cover.
4. To turn the pad on, press the Power Button and set control to the desired heat
setting. To turn the pad OFF, scroll through remaining heat settings by pressing
the Power Button until none of the heat settings are selected.
5. Auto-Off function will shut the heating pad down automatically after 30
minutes of use. This is indicated by the flashing light of Auto-Off indicator on
the controller. To reset, press the Power Button and select the desired heat
setting.
NOTE: In case of power outage, the Auto-Off feature will automatically reset the timer.
USING MOIST HEAT THERAPY
In some cases, you may find that moist heat therapy provides more
comfort and relief. When using moist heat therapy, you should
protect furniture and clothing from becoming damp.
1. Dampen one side of the cover with warm water by patting
the surface with a wet sponge or cloth or use a spray bottle
to apply a fine mist. Do not thoroughly soak the cover.
2. Do not spray or dampen the power cord.
DANGER: Do not immerse the pad or wiring in water or place under running water.
Failure to comply may result in product failure and/or personal injury.
FABRIC COVER WASHING INSTRUCTIONS
DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER!
1. Disconnect pad from outlet.
2. Remove cloth cover from pad.
3. Machine-wash the cover in cool water on gentle
cycle, or hand wash. Use mild detergent.
4. Hang to dry or machine dry on gentle, cool cycle.
5. Insert the vinyl pad inside the cloth cover.
NOTE: The cover is designed so that the air inlet valve fits inside it only one way. This
feature ensures that the pad's heated surface is always on the soft side of the cover,
which is intended to be used against the body. Follow the markings on the cover for
more direction. Make sure that the cord and controller remain on the outside of the
cover. Zip the cover closed.
WARNING: Never use this pad without the cloth cover.
5-Year Limited WarrantY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada)
Limited doing business as Jarden Consumer Solutions (collectively "JCS") warrants that for a period of five years from the
date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace
this product or any component of the product found to be defective during the warranty period. Replacement will be made
with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a
similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or
mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser
from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to
obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter,
modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or
damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use
contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service
center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS's Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory
warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability
or fitness for a particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be
liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including
incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or
otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow
the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights that vary from province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A. - If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-435-1250
and a convenient service center address will be provided to you.
In Canada, - If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-667-8623
and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in
Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as
Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or
claim in connection with this product, please write our Consumer Service Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
©2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by Sunbeam
Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Printed in China. DW-052912
www.sunbeam.com
PN: 156799
5/29/12 4:30 PM