• error 15
decompression fault:
- unplug the cookeo touch,
- leave to cool,
- remove the metal lid,
- correctly position
the ball cover.
• error 16
the cookeo touch
doesn't build up pressure:
- add water to the bowl,
- resume cooking.
• error 17
the cookeo touch
pressure fails to raise.
See page 56
"The cookeo touch pressure fails
to raise and steam is not being
released properly".
60
• error 18
failure to detect the
locking rod.
• error 101, 106
display or recipe
loading error:
Unplug and restart the appliance.
If the problem persists, take
your appliance to an
Approved Service Centre.
For all problems,
unplug the cookeo touch.
If the problem persists,
contact an Approved Service Centre.
If you experience
connection problems,
visit
www.moulinex.co.uk or
the Cookeo app.
Your cookeo touch model :
EPC13 series and EPC13-A series
Technical information
about your cookeo touch:
Low pressure: 40kPa (109°c)
High pressure: 70kPa (115°c)
Very high pressure: 100kPa (119°C)
PS = 140kPa
Cookeo touch capacity: 6L
Usable capacity: 4L
Built-in heater:
enclosed heating resistor.
A beep signals that
operating pressure has been reached.
For models with WiFi:
Maximum transmitted power:
20dBm, 100mW
Frequency: 2,4GHz
61