Storage And Cleaning - Panasonic TY-ER3D4ME Instrucciones De Operación

Storage and Cleaning

 Clean using a soft, dry cloth.
 Wiping the 3D Eyewear with a soft cloth that is covered in
dust or dirt may scratch the eyewear. Shake off any dust
from the cloth before use.
 Do not use benzene, thinner, or wax on the 3D Eyewear,
as doing so may cause the paint to peel off.
 Do not dunk the 3D Eyewear in liquid such as water when
cleaning.
 Avoid storing the 3D Eyewear in hot or highly humid
locations.
 During the long period of disuse, full charge the
3D Eyewear once every 6 months to keep the battery
performance.
 As the liquid crystal shutters (lens) are fragile and easily
broken, be very careful when cleaning them.
Disposal
A lithium-ion polymer rechargeable battery is built in
to the 3D Eyewear. Please discard according to local
regulations.
When disposing this product, disassemble properly by
following the procedure on the next page, and remove
the internal rechargeable battery.
Do not disassemble this product except when
disposing of it.
Danger
As the rechargeable battery is specifi cally for this
product, do not use it for any other device.
Do not charge the removed battery.
 Do not throw the battery in a fi re, or apply heat to it.
 Do not pierce the battery with a nail, subject it to an
impact, or dismantle or modify it.
 Do not let the wires touch any other metal or each other.
 Do not carry or store the battery with a necklace, hair
pin, or the like.
 Do not charge, use, or leave the battery in a hot location
such as near a fi re or under the hot sun.
Doing so may cause the battery to generate heat, ignite, or
rupture.
10