Troubleshooting Guide - Speedaire 440G18A Instrucciones De Funcionamiento Y Manual De Piezas

TROUBLESHOOTING GUIDE

Symptom
Fluid path (plumbing
and/or Swivel) is
leaking or damaged
Reel will not latch
Fluid leaks from
swivel
Swivel assembly is
not moving freely or
locking up
6
Possible Cause(s)
1. Maximum pressure
rating for reel has been
exceeded
1. Incorrect operation
2. Dog spring or locking
cam is broken or worn.
1. Swivel seals are
damaged or worn
2. Inlet hose is not flexible
1. Inlet hose is not flexible
causing side force on
swivel
Corrective Action
1. Replace or repair damaged
components. Check maximum
pressure rating of reel.
1. To latch the reel, pull out the hose
and allow it to retract after hearing
the first, second, or third "click".
2. Replace dog spring or locking
cam.
Replace swivel seals. See "Swivel
Seal Replacement".
CAUTION: Be sure leak is not at
Hose Fitting!
1. Properly tighten inlet hose. Hand
tighten fitting, plus 1/2 turn with
wrench.