Conceptronic C54PSERVU Guía De Instalación Rápida página 21

ENGLISH
6.2 Network Driver Installation
For printing but no management only the Network Driver is required. This option will
only install the Network Driver and no Management Utility.
1. Select the option "Install Print Server Network Driver" in the Menu.
2. The Setup Wizard will appear. Click "Next" to continue.
3. Change the installation destination with the "Change" button, or keep it default.
Click "Next" to continue.
4. The software will be installed. After installation, it will search for an available Print
Server. Please wait for the "Add Port" list.
5. The "Add Port" List will display the added Network Printing Ports to your computer.
If the Print Server is connected to your network, it will display the Print Server in the
List. Click "Continue" to proceed with the installation.
Note: If there is no Print Server found, check if the C54PSERVU is turned on and
connected to your network. Verify if the IP Address of the C54PSERVU is
compatible with your network! To add the Network Port later, continue to
chapter 7!
6. The installation is complete. Click "Finish" to close the C54PSERVU Network Driver
installer.
Your computer is now equipped with the Network Driver for the C54PSERVU.
1
5
21