Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. INSTALLATION
2.1 Location
When selecting a position for your unit you should make sure the floor is flat and firm, and the
room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold ambient
temperatures may also cause the unit not to perform properly. This unit is not designed for use in
a garage or outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 4 inch of free space is left at both sides, 4 inch at the rear
and 12 inch at the top of the unit. This will allow cold air to circulate around the unit and improve
the efficiency of the cooling process.
2.2 Reversing the Door Swing
Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
·Ensure the Appliance is unplugged and empty.
·Adjust the two leveling feet to their highest position.
·We recommend you have someone to assist you.
1) Remove the right top hinger cover .
2
Publicidad
Tabla de contenido
Solución de problemas
