Operation; Cleaning And Care - Blumfeldt Cosmic Beam Manual Del Usuario

OPERATION

1. Connect the device to a mains socket. Make sure that the power supply is
the same as the one on the type plate.
2. Press the switch on the left to switch on the unit. The operating light
fl ashes to indicate that the unit is in standby mode. Press the ON/OFF
button on the control panel or remote control to switch on the unit. To
return the heater to standby mode, press the On/Off button again.
3. To switch off, press the switch on the left side of the unit.
CAUTION
Risk of burns! Some parts of the appliance can become very hot
and cause burns. Special care should be taken when children and
infi rm persons are present.

CLEANING AND CARE

• Before cleaning, unplug the appliance from the wall outlet and allow it to
cool down completely.
• Do not use abrasive cleaners or solvents for cleaning and never immerse
the device in water.
• Clean the outside with a soft and damp cloth.
• This device contains parts that are not accessible to the user. Repairs may
only be carried out by qualifi ed specialists.
EN
17