Quick Setup - Xiaomi Aqara Manual De Instrucciones

Quick Setup

1. Please add the Hub to the app according to the Hub
Quick Start Guide.
2. Please open the app, tap "Home" and then tap "+" in
the top right corner to enter "Add Device (Accessory)"
page. Select "Temperature and Humidity Sensor",
and add it according to instructions.
* If the connection fails, please move the accessory closer to the
Hub and try again.
Installation
Effective Range Test: Single press the reset button on
the accessory at your desired position. If the Hub makes
voice prompts, it indicates that the accessory can
communicate effectively with the Hub.
* Avoid metal surface to maximize signal strength.
Option 1: Place it directly in the desired position.