User Manual
Setup
1 Connect AC power cable from
charging cart to power outlet.
2 Enter user password (1 2 3 4 ; see
Passwords section) into keypad and
press OK; a long tone sounds and
open-lock symbol
knob to OPEN and open door.
3 Load devices in bays.
4 Connect USB cables from cabinet
ports to devices. Close door ; turn
the main power switch to ON (LEDs:
red = charging; green = standby).
Powering Other Devices (Optional)
5 a) Connect to the USB-A port
to charge a device.
5 b) Power up to two additional devices
by connecting power cords to outlets.
Lock Cabinet
With door closed, turn
keypad knob to LOCK.
Battery
• Low battery
keypad batteries.
• Replace batteries: Remove
battery compartment on keypad,
replace CR2032 batteries and
reinstall compartment.
2
English
lights. Turn
: if lit, replace
32-Port Charging Cart - 576 W
1
2
3
4
5
a
b