Insignia IS-EDPLTV42 Guia Del Usuario página 23

OSD menu
Picture in Picture
Preset
22
Options
PIP Position–Moves the PIP window around
the screen.
PIP Size–Determines the type of window for
the subpicture. You can select:
Off–Turns the PIP feature off.
PIP–Shows the main picture on the full
screen and the subpicture in a small
window.
PBP–Divides the screen into two equal
parts with the main picture displayed on
one side and the subpicture displayed on
the other side.
PIP Source–Selects the video source for the
PIP window.
If the video input for the main picture is TV,
Video, or S-Video, the PIP picture can be
ED TV, PC, or DVI.
If the video input for the main picture is
ED TV, PC, or DVI, the PIP picture can be
TV, Video, or S-Video.
PIP Brightness–Adjusts the brightness of the
PIP window.
PIP Contrast–Adjusts the contrast of the PIP
window.
Position–Shows the current channel.
Skip–Adds or erases a channel number from
stored memory. When you erase a channel
number, you cannot tune to the channel using
the CH + or CH – button. You can still tune to
the channel using the number buttons.
RF Input–Sets the signal source as a TV. You
can select:
Air–Select if your TV signal comes from
an antenna.
CATV (STD)–Select if your CATV uses the
STD standard.
CATV (HRC)–Select if your CATV uses
the HRC standard.
CATV (IRC)–Select if your CATV uses the
IRC standard.
Auto Search–Automatically searches for TV
channels that have a signal.
www.insignia-products.com
IS-EDPLTV42 42-inch ED TV