Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE START-UP PLEASE READ THE INSTRUCTIONS CAREFULLY.
The water jet can be dangerous if used incorrectly; never direct the water jet towards yourself or others, do not
use water jet to clean clothing or footwear, never direct the water jet towards animals or electrical appliances.
Do not let children or persons not familiar with these safety instructions use the unit.
Before start-up make sure that the lance is not unrestrained and free: the sudden jet of high pressure
water would turn the lance into a dangerous whip.
1
3
Nipple
Adapter
5
40° C
MAX
104° F
MAX
IN
STARTING - UP
1. Handle assembly.
Only for the Jet Cleaner
1600 TSS model.
3. Attach nipple adapter to
inlet fitting on the unit.
Make sure supplied filter is
installed.
Sand, limestone and
sediment damage the pump
valves.
Using soiled water
invalidates the warranty!
5. Open the water tap
completely. The maximum
temperature of the incoming
water can not exceed 104°F
(40°C). The maximum pressure
of the incoming water can not
exceed 100 psi (7 bar).
The minimum pressure of the
incoming water can not be less
than 30 psi (2 bar) to obtain the
best performances of the
machine.
7. Pull the gun trigger to
7
release the trapped air and
pressure.
2
A
Nipple
Adapter
Garden Hose
4
6
- 4 -
2. Turn the starting switch
into the "OFF"position.
Connect the high pressure
hose to the delivery
pipe OUTLET.
OFF
4. GARDEN HOSE
Quick
CONNECTION
Connect
INSTRUCTIONS
Fitting
1) Attach quick connect fitting
to garden hose.
2) Pull side "A" of quick
connect fitting toward garden
hose and push onto nipple
adapter.
3) Push side "A" of quick
connect fitting towards nipple
adapter and release.
6. Plug into 120 Volt
15 Amp. circuit.
Only Models Sold in the
U.S.A. are equipped with a
GFCI (Ground Fault Circuit
Interrupter) plug.
Only for high pressure
cleaners provided with a
ground fault circuit
interrupter GFCI: push
"RESET" button on GFCI
plug.
ON
Publicidad
