Turning On The Printer - Canon imagePROGRAF GP-300 Guía De Configuración

4

Turning On the Printer

1
Connect the power cord to the printer.
●
Insert the power cord into the power connector on the side of
the printer.
3
When the language selection screen appears on the
touch screen, select and gently tap a language with
your finger. Then, if the screen for selecting a time zone
appears, select and tap your region.
5
When a message prompting you to start the setup
appears on the touch screen, tap OK.
2
Turn on the printer.
4
Tap Next.
●
Perform the remaining operations by following the instructions
on the screen. In the middle of these operations, there is a
choice about sending information. Read "Sending Information
To Canon" (P.13).
5