Switch Ball; Minimum Temperature - Mohlenhoff Standard Manual Del Usuario

Switch ball

Temperature Setback „ON". Independently of ex-
ternal signals, the Temperature Setback is acti-
vated manually and the temperature is reduced
by 2-6 K.
Temperature Setback „OFF". The Thermostat is
set to constant heating.
Temperature setback„AUTOMATIC"*
* Automatic temperature adjustment is only possible with an external timer
(as e. g. TM 1000, DS 1000 or Control thermostat).

Minimum temperature

Komfort K2E
The minimum floor temperature is determined!
On position "ext." only the external sensor is used
for regulation; the internal sensor is inactive. The
target temperature of the floor is then adjusted
with the regular temperature selector.
Adjustment range of external sensors 1–6 : 16 °C to 28 °C
Reaching the chosen floor temperature strongly
depends on the environment conditions, as e. g.
the position of the external sensor and the floor
structure. Therefore, the described adjustment
range is made up of reference values.
DEU
ENG
FRA
ITA
SPA
NLD
RUS
23