Publicidad
ENGLISH
SL886RU
6W COB LED Rechargeable Work Light
OWNERS MANUAL
1. IMPORTANT SAFETY INSTRUCTIONS
1.1 SAVE THESE INSTRUCTIONS –
This manual contains important safety
and operating instructions.
1.2 Read, understand and follow all
instructions, cautions and warnings
listed in this manual. Failure to follow all
instructions and abide by all cautions and
warnings could result in personal injury,
injury to others and property damage.
1.3 IMPORTANT! CHARGE WORK LIGHT
IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST
EVERY 6 MONTHS.
1.4 DO NOT turn on the work light while it is
being charged.
1.5 DO NOT handle or move the work light
while it is being charged.
1.6 DO NOT cover or block the lens during use.
1.7 DO NOT look directly into the light or
shine the light directly into the eyes of any
person or animal.
1.8 DO NOT allow children to use the
work light.
2. PERSONAL SAFETY PRECAUTIONS
WARNING! TO REDUCE THE RISK OF
BURNS OR FIRE, FOLLOW THESE
SAFETY PRECAUTIONS:
2.1 DO NOT disassemble the work light;
take it to a qualified service person when
service or repair is required. Incorrect
reassembly may result in a risk of fire.
2.2 DO NOT crush, puncture, short external
contacts or dispose of in fire or water.
2.3 DO NOT expose to temperatures above
113°F (45°C).
2.4 Recycle or dispose of the used battery as
required by local regulations.
2.5 If the electrolyte in the cells gets on
your skin, wash thoroughly with soap
3. SET UP INSTRUCTIONS
3.1 Remove any cord wraps and uncoil the charging cable.
SAVE THESE INSTRUCTIONS.
• 2 •
1.9 ONLY operate the work light on flat,
stable surfaces.
1.10 DO NOT operate the work light if it has
received a sharp blow, been dropped, or
otherwise damaged in any way; take it to
a qualified service person.
1.11 DO NOT leave the battery in a
discharged state.
1.12 IMPORTANT: Make sure to use a USB
charging port rated for 1A @ 5V DC or
higher. If the product does not charge
with a USB plug, make sure the voltage
marked on the charger plug is the same
as the work light.
1.13 DO NOT use the work light with a charger
which has a damaged cord or plug,
replace the cord or plug immediately.
1.14 DO NOT immerse the work light in water.
1.15 Ensure the work light is unplugged and
allowed to cool before attempting any
cleaning.
and water. If it gets into your eyes, rinse
thoroughly with cool water and seek
immediate medical attention.
2.6 This product contains a lithium ion
battery. In case of fire, you may use
water, a foam extinguisher, Halon,
CO
, ABC dry chemical, powdered
2
graphite, copper powder or soda (sodium
carbonate) to extinguish the fire. Once
the fire is extinguished, douse the
product with water, an aqueous-based
extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the
battery from re-igniting. NEVER attempt
to pick up or move a hot, smoking, or
burning product, as you may be injured.
Original instructions
Publicidad
