Descargar Imprimir esta página

Technical Specifications - HQ-Power MICW30A Manual Del Usuario

Ocultar thumbs Ver también para MICW30A:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

10.

Technical Specifications

See section 1 for applicable frequencies.
system
receiver
microphone
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 03 – 03/09/2013
MICW30A-B-C-D-E-F-G-H
frequency response: 40 Hz - 15 kHz (+ 3 dB)
frequency stabilization: < ± 30 ppm
dynamic range: > 90 dB
total harmonic distortion: < 0.5 %
audio output level: separate: 0 to ± 400 mV
audio output level: mixed: 0 to ± 200 mV
power consumption: 4 W
S/N ratio: > 90 dB
spurious image rejection: > 80 dB
sensitivity: 10 dB (SINAD = 30 db)
DE-emphasis: 50 µs
modulation type: FM F3F
output power: 8.5 mW
max. deviation: ± 25 kHz
spurious emission: > 40 dB
receiver: 12-17 VDC 300mA (adaptor incl.)
microphone: 1 x 9 V E-block battery (6F22C, incl.)
receiver: 180 x 105 x 30 mm
microphone: Ø 51 x 255 mm
receiver: 425 g
microphone: 190 g
6
©Velleman nv

Publicidad

loading

Este manual también es adecuado para:

Micw30bMicw30cMicw30dMicw30eMicw30fMicw30g ... Mostrar todo