Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10
MODE: By pressing the "Mode" button, the fan is set to normal wind, natural wind or
sleep mode.
TIME: The timer can be set between 1-12 hours. After the timer expires, the tower fan
will be automatically switched off or on.
-Set off timer: During operation, press the timer function to set the hours. Each
further press of the button increases the timer by 1 hour. After setting the timer, the
timer display will return to the temperature display.
Note: Switching the unit off and on will reset the timer function.
-Set switch-on timer: Dress the Time function when the unit is switched off (standby
mode). Each further press of the key increases the timer by 1 hour. After you have set
the timer, the timer display returns to the temperature display. Note: This function
can be combined with the other modes.
OSC(Oscillation): The tower fan starts rotating. Press the key again to switch the function
off.
ANION (Ionizer):Pressing this button turns the function on. Pressing the button again
turns the function off. The function consists of enriching the air with negative ions
(particles with a negative electrical charge). These particles bind to all impurities in the
air and neutralize them.
SMART MODE: Press SMART MODE to turn this mode on or press it again to turn it off.
The device automatically adjusts its speed based on the room temperature.
•
When the room temperature ≤ is 25 °C, the speed is "2".
•
When the room temperature is 26-27 °C, the speed is "3".
•
When the room temperature is 28-29 °C, the speed is "5".
•
When the room temperature ≥ is 30 °C, the speed is "6"..
Always turn off the appliance before performing any maintenance or checks. Check all
parts for signs of wear. If any problems are detected, do not use the product. Always
replace all parts with original replacements according to the manufacturer's guidelines.
If the product is not properly cared for and maintained, it can become unsafe and can
also become damaged. This can lead to dangerous situations. Regular maintenance
on the product helps to make the product safe and will also increase its lifespan. All
repairs should be made by a competent qualified electrician. Do not repair this appliance
yourself. Use a soft damp cloth for cleaning the housing, use some soapy water to
remove stubborn dust. Do not use petrol, thinners or other solvents. Do never insert
fingers, pens or other objects through the air vents to remove any dirt. Make sure that
the appliance is stored in a dry environment.
Maintenance, Care and Storage
www.DeubaXXL.de
Publicidad
Tabla de contenido
