WARNING!
Item 106180/106181 is only loadable per floor 70 kg!
Always wear gloves, when assembling the unit to prevent injury.
•
Never exceed the maximum shelf load or the maximum load for the complete
•
unit array.
Load small stable items on the top shelf, heavier and bulkier item should be
•
stored on the lower shelf.
The shelf unit must not be selectively subjected to the specified load of 175 kg
•
per shelf. The load on the shelves must be evenly distributed so that no harm can
come to the wooden boards.
The unit is not suitable for rooms with elevated humidity, as this could cause
•
damage to the wooden boards.
For your safety, the shelf unit must always be assembled with suitable wall
•
mounting.
When assembling, do not drill into water or electric conduits.
•
Please use a rubber hammer to avoid damaging the finish.
Only erect the unit on horizontal, smooth floors, or else stability and maximum
•
load-bearing capacity may not be guaranteed.
Please only use wall plugs and retaining screws which are suitable for your type
•
of wall and the weight of the unit.
Hint: If the connector tabs of the shelf cross pieces should bend on assembly, they can be
bent back into their original position with the aid of a flat head screwdriver.
Workbench as an alternative
Optional Build to a workbench possible, see pic
Not included in the scope of delivery, but recommended for assembly:
Screwdriver
Mallet
Gloves
Plugs and screws
www.DeubaXXL.de
5