Descargar Imprimir esta página
Toto TBV02405 Manual De Instalación
Ocultar thumbs Ver también para TBV02405:

Publicidad

Enlaces rápidos

03N29E
CONCEALD THERMOSTAT AND 1WAY PUSH BUTTON
SHUT OFF VALVE
CONCEALD THERMOSTAT AND 2WAY PUSH BUTTON
SHUT OFF VALVE
For best results, install the product correctly according to the instructions in this Installation Manual.
After installation, thoroughly explain how to use the product to the customer.
Für beste Ergebnisse installieren Sie das Produkt korrekt den Anweisungen in dieser Installationsanleitung entsprechend.
Erklären Sie dem Kunden nach der Installation gründlich die Gebrauchsweise des Produkts.
Д
П
а
Para conseguir los mejores resultados, instale el producto correctamente siguiendo las instrucciones en este manual de instalación.
Después de la instalación, explique detalladamente al cliente cómo utilizar el producto.
Pour des résultats optimaux, veuillez installer le produit correctement en suivant les instructions de ce manuel d'installation.
Après l'installation, expliquez en détail au client comment utiliser le produit.
Per i migliori risultati, installare correttamente il prodotto seguendo le istruzioni di questo Manuale di installazione.
Dopo l'installazione, spiegare con accuratezza al cliente come usare il prodotto.
Important safeguards
EN
Read the "Important safeguards" section thoroughly before installing the product.
This manual provides the following symbols to ensure
safe and proper installation of the product. Failure to
observe them may cause injury or property damage
to the customer and other persons.
The symbols and their meanings are as follows.
Indicates a potentially hazardous
Warning
situation which, if ignored, could
result in death or serious injury.
Indicates a potentially hazardous
Caution
situation which, if ignored, could
result in injury or property damage.
Do not assemble the functional part
upside down.
You may be scalded with hot water even when you
expect cold water to come out.
Do not use hot water that is hotter than
Do Not
85°C.
If water hotter than 85°C is used, faucet life will be
reduced, damage will occur, and property damage,
scalding and other injures may occur due to water
leakage.
Do not disassemble or modify the item in
any way not described in this manual.
If the product is broken, property damage, scalding
Do not
and other injuries are likely to occur.
disassemble
EN
Installation Manual
Installationsanleitung
DE
RU
Р
ES
Manual de instalación
FR
Manuel d'installation
IT
Manuale di installazione
а
а
а а
, а
The types of content to be observed
are classified and explained using
the following symbols.
indicates "Absolutely
Do NOT" contents.
Warning
а
а
а
-1-
(For your safety, please be sure to follow the instructions below)
When cleaning the filter, be sure to close
the main valve at the piping part first.
Also, make sure that the filter on hot
water side is not so hot.
Hot water at a high temperature may come out and
scald you or cause damage to your property due to
water leakage.
Be sure to adjust the temperature so that
hot water will come out according to the
graduation mark.
Mandatory
Hot water may not come out according to the
graduation mark and scald you, depending on the
working conditions.
Functional part
Firmly tighten the screws for fixing the
functional part.
If a gap is made between the embedded part and the
functional part, property damage due to water
leakage may occur.
Do not subject to strong force or shock.
85°C or less
If the product is broken, property damage may occur
due to water leakage.
Do not install the product in a place
where freezing is likely occur.
Do Not
Parts may be broken and water may leak and cause
damage to your property by wetting household
goods.
-2-
а
а а
а
.
TOTO Europe GmbH
Zollhof 2, 40221 Düsseldorf Germany
Phone : +49-211-27308-200
Warning
Caution
2017.5
TBV02405
TBV02406
а
а
.
Main valve
Tighten firmly
(4 positions)

Publicidad

loading

Resumen de contenidos para Toto TBV02405

  • Página 1 Après l'installation, expliquez en détail au client comment utiliser le produit. Per i migliori risultati, installare correttamente il prodotto seguendo le istruzioni di questo Manuale di installazione. Dopo l'installazione, spiegare con accuratezza al cliente come usare il prodotto. TOTO Europe GmbH Zollhof 2, 40221 Düsseldorf Germany Phone : +49-211-27308-200...
  • Página 2: Wichtige Sicherheitsvorkehrungen

    Wichtige Sicherheitsvorkehrungen (Befolgen Sie zu Ihrer eigenen Sicherheit bitte die unten genannten Anweisungen) Lesen Sie die "Wichtige Sicherheitsvorkehrungen"-Sektion gründlich, bevor Sie das Produkt installieren. Warnung Diese Anleitung benutzt die folgenden Symbole, um Die Arten von zu befolgenden Beim Reinigen des Filters stellen Sie die sichere und richtige Installation des Produkts zu Inhalten werden anhand der sicher, dass das Hauptventil zuerst am...
  • Página 3: Medidas De Seguridad Importantes

    Medidas de seguridad importantes (para su seguridad, asegúrese de seguir las instrucciones a continuación) Lea detalladamente la sección de «medidas de seguridad importantes» antes de proceder a la instalación del producto. Aviso Este manual presenta los siguientes símbolos para Los diferentes contenidos a tener Cuando limpie el filtro, asegúrese de garantizar la instalación correcta y segura del producto.
  • Página 4 Se il prodotto è rotto, potrebbero verificarsi danni alla Evitare proprietà, scottature e altri infortuni. Alcuni componenti potrebbero rompersi e potrebbe fuoriuscire dell'acqua, provocando danni alla proprietà smontare bagnando effetti domestici. (mm) 74.5±13 (mm) TBV02405, TBV02406 TBV02405 (mm) TBV02406...
  • Página 5 ~2mm 0~2mm Close Close ~1mm Open Open 40°C -10-...
  • Página 6 Pull the lid forward while rotating it then remove it. Remove the curing tape. Before installation Attaching the resin plate If the water supply pressure exceeds 0.75 MPa, reduce it to approx. 0.2 to 0.3 Turn the side with the seal material towards the wall side and fix the resin MPa using a commercially available pressure reducing valve.
  • Página 7: Especificaciones

    За а а а а а а а а С а . (Н а ) П П а а а , а а . С Е а а а 0,75 МПа, У а а а 0,3 МПа а а а а...
  • Página 8 Retirez la plaque. (Laissez les vis d'ajustement fixées) Tirez le couvercle vers l'avant tout en le faisant tourner, puis retirez-le. Retirez le ruban de séchage. Avant l'installation Fixation de la plaque en résine Si la pression d'alimentation en eau excède 0,75 MPa, réduisez-la à environ 0,2 ou 0,3 MPa au moyen d'une soupape de réduction de pression, disponible dans les commerces.

Este manual también es adecuado para:

Tbv02406