Aqua Marina BLUEDRIVE S POWER FIN PF-240S Guia Del Usuario página 10

a. Insert the power cord of the charger into the corresponding hole position on the charger to
charge the battery case.
b. Screw off the metal nut on the back of the battery case counterclockwise;
c. Connect the metal plug on the charger to the corresponding connector on the battery case
(Please note the direction of convex and concave corresponding position) and tighten the nut;
d. Plug the power plug of the charger into the home power supply.
e. Snap the magnetic switch in the right position of the battery case. And the indicator light on
the charger will turn red when it is charging successfully. Please note: the battery case can
NOT be charged when it is not connected with the magnetic switch.
f. The indicator light on the charger will turn solid green when the battery case is fully charged.
After charging, remove the power plug and charger and keep them properly for next
charging.
3.1 Put the battery case on the ISUP with the
direction of metal plug towards the stern
of ISUP;
3.2 Fix the battery by fastening the elastic ropes
across the bottom of board respectively
and hook them on the 4 corners of battery box.
4. The connection between the power fin and the battery case: screw off the nut lid of the metal
plug on the battery case, and insert the metal plug in the end of power line of the power fin
into the corresponding metal socket hole of the battery case with correct direction and proper
inserting; and tighten the metal nut;
Metal plug towards the stern of ISUP
10