Technical Data; Noise/Vibration Information - Berner BACJS 12 V Manual Original

OBJ_BUCH-2438-003.book Page 16 Monday, October 23, 2017 2:22 PM
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the work-
piece. It is suitable for straight and curved cuts with
mitre angles to 45 °. The saw blade recommenda-
tions are to be observed.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Battery pack
2 Battery unlocking button
3 "PowerLight" button
4 Thumbwheel for stroke rate preselection
5 Battery charge-control indicator
6 Temperature control/overload protection
indicator
7 On/Off switch
8 Adjusting lever for orbital action
9 Base plate
10 Guide roller
11 Stroke rod
12 Plastic sliding shoe
13 Lead for the parallel guide
14 Saw blade*
15 Splinter guard
16 Extraction hood
17 "PowerLight"
18 Vacuum connection
19 Handle (insulated gripping surface)
20 Nose plastic sliding shoe
21 SDS clamping lever for saw blade release
22 Contact protector
23 Vacuum hose*
24 Screw
25 Hex key
26 Scale for mitre angle
27 Locking screw for parallel guide*
28 Parallel guide with circle cutter*
29 Centring tip of the circle cutter*
* The accessories illustrated or described are not
included as standard delivery.
16 | English

Technical Data

Cordless Jigsaw
Art. No.
Rated voltage
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to
EPTA-Procedure 01:2014
Permitted ambient
temperature
– during charging
2)
– during operation and
during storage
Recommended batteries
Recommended chargers
1) depending on the battery pack being used
2) limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted sound pressure level of
the product is 77 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and
h
uncertainty K determined according to
EN 60745-2-11:
Sawing chipboard: a =5.5 m/s
h
Sawing sheet metal: a =5.0 m/s
h
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
BACJS 12 V
343776
V= 12
-1
min 1500–2800
mm 18
mm 70
mm 3
mm 3
° 45
1)
kg 1.5
°C 0...+45
°C –20...+50
BBP 12V
x.xAh
BACP 10,8V Li
x.xAh
BBC 12V
BACC 10,8V Li
2 2
, K=1.5 m/s ,
2 2
, K=1.5 m/s .
1 609 92A 44K • 23.10.17