Auerswald COMfortel H-500 Manual De Instrucciones página 5

Headset
To attach the headband
to the microphone, align
the three notches on the
microphone with the
spaces on the headband,
push together and twist
to the left or right to
lock in place and then
rotate to your preferred
position.
The microphone arm will
rotate a full 360°.
Speaker Volume Call Indicator
Down Up
Mute
To change the speaker
volume, tilt the volume
switch towards the
Positioning the Boom Arm
plus sign to increase
the volume and tilt the Holding the headset, rotate
switch towards the minus
the boom arm to bring the
sign to decrease the boom arm close to your
volume. Press the top of
mouth. The ideal position is
the switch downwards to usually at the corner of
activate the microphone your mouth, about 2-3 cm
mute mode. away from your face.
Visual Indicator
Microphone
volume & mute
Visual window
Microphone mute
Charging Status LED Status on Headset
Charging Red LED: 'ON'
Fully charged Blue LED: 'ON'
Low battery
Incoming call
Event LED Status
Press microphone mute Mute indicator: 'ON'
Hook off Blue LED blinking on headset
Audio Indicator on Headset
Event
Speaker / microphone volume
Max/min speaker volume
Max/min microphone volume
Microphone mute/unmute
Mute reminder
Hook on/off
Call hook on/off
In-use indicator
Visual Window
White
White
Blinking in White
Blinking in Green
Green
Sound Effect
Beep sound 'UP' - high tone,
'DOWN' - low tone
Double beep
Double beep
Mute: Single beep / Unmute: Double beep
Beep every 5 sec
Hook off: Double beep (high tone)
Hook on: Double beep (low tone)
Base Unit
Microphone mute
Microphone volume
Compatibility switch
Handset Port
Telephone port
AUX port
DC jack port
Busy light jack port
Call hook
on/off
Auto-answer Option
The COMfortel™ H-500 has an auto-answer
option which allows you to either disable
(turn-off) or enable (turn-on) answering
a call by taking the headset off of the
charging cradle. The headset is supplied
with this function turned on. When the
auto-answer is turned off, you can answer
the call by pressing the 'Call hook' button
on the headset.
Turn off Auto-answer option
1. Put the headset on the base unit's charging cradle.
2. When the headset is on the charging cradle, press the volume down button
of the headset for more than 2 seconds.
3. To indicate it is disabled, the LED on the headset will blink blue five times.
Turn on Auto-answer option
1. Put the headset on the base unit's charging cradle.
2. When the headset is on the charging cradle, press the volume up button of
the headset for more than 2 seconds.
3. To indicate it is enabled, the LED on the headset will blink blue three times.
Microphone volume (TX)
Microphone mute
Compatibility switch
Touch to mute the call.
Adjust microphone sensitivity to ensure optimal call
quality and noise cancelling.
Select 1 or 2 until a dial tone is heard via the
telephone connection.
AUX
AUX
If required, plug the handset cord from the desk
phone into the handset port of the COMfortel™
H-500. (You may need to do this if your desk phone
doesn't have a dedicated headset port. If your desk
phone has a headset port, it is not neccessary to plug
the handset into the COMfortel™ H-500).
Connect the telephone cord (supplied) into the
headset port or handset port.
Connection facility for the DHSG/EHS adapter
(supplied).
Connect power adapter to DC jack port.
Optional port for busy light connection.
Handset port
Desk phone port
AUX port
DC jack port
Busy light jack port (optional)
Down Up