Eldom HL10 Manual De Instrucciones página 9

GENERAL DESCRIPTION
1. ON/OFF switch
(operation mode)
2. Indicator light
3. Thermostat
4. Carrying handle
5. Air blowing opening
6. Air inlet
TECHNICAL DATA
- power: 2000W
- supply voltage:
230V ~ 50Hz
HOW TO USE THE APPLIANCE
- After unpacking the appliance, make sure it has not been damaged during transport.
In case of any doubts, do not use the appliance until consulting a service centre.
Put the appliance onto a flat, stable and high temperature resistant ground.
- Turn the switch (1) to position "
- Connect the appliance to a power source with parameters in accordance
with the Instructions for Use.
- choose operation mode by turning the knob (1):
- cool air
- hot air
- very hot air
The appliance starts working after choosing the temperature
by turning the thermostat handwheel (3).
- The appliance work is signaled by control lamps (2)
When used for the first time, the heating elements and insulation can emit characteristic smell.
It is a normal phenomenon.
Do not cover outlets when the appliance is in operation.
CLEANING AND PRESERVATION
- Before cleaning remove the power cable from the socket
- The appliance cannot be submersed in water
- Do not use any cleansing agents which are strong and damage the surface
- Wipe the housing with a moistened cloth
INSTRUCTIONS FOR USE
4
6
O
" (appliance turned off).
9
FAN HEATER HL10
2
3
5
1
FOT. 2