Cleaning With The Brush - Axis AX-1300 Manual De Instrucciones

fresh cold or lukewarm water to run over the
cutters.
3. When finished cleaning, switch the shaver off
and replace the foil screen assembly, making sure
it locks into place.
* Clean the inner blade with the brush at least once
every three (3) washings.

ClEANING WITH THE BRUSH

1. Your razor should be cleaned with the brush
provided after ever three wet cleanings.
2. Switch the shaver off. Depress the outer foil
Axis Rev |1| English
base release buttons on the
side of the unit and gently lift
the foil screen assembly off.
3. Gently brush the hairs from
the inner cutters, the inside
surface of the foil screen as-
sembly and the shaver's case.
To remove the inner cutters for
cleaning, gently lift straight up
from its mount.
4. To clean the delicate outer
Axis Rev |1| English
correct incorrect