Before Using; Features & Benefits - Villaware NDVLCD0000 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before Using:

When unpacking the product, remove any
packing material, and any promotional labels
or stickers from your Coffeemaker. Be sure
all parts (listed under "Features") of your
new appliance have been included before
discarding any packaging materials. you may
want to keep the box and packing materials
for use at a later date.
make sure your first cup of coffee is as
good as can be by cleaning your VillaWare™
Coffeemaker before its first use. Just follow
these simple steps:
Wash the decanter, decanter lid and the
1
filter basket in a mixture of mild detergent
and water. Rinse each thoroughly (please
refer to the "Features" diagram).
2
Replace all the parts and close the lid.
Then, run a brew cycle with water only,
without adding coffee and coffee filter.
When brewing is complete, turn your
3
coffeemaker off, discard the water in the
decanter and rinse the decanter, decanter
lid, and filter basket.
your coffeemaker is now ready to use. Enjoy
it! Be sure to read the "Care & Cleaning"
section of this manual to learn the correct
methods for cleaning.
4
villaware.com
villaware.com
Features & Benefits:
Control Panel
a
Clock
Clock
mIN.
mIN.
b
c
hR
hR
(hour)
(hour)
d
SET DELAy
SET DELAy
SELECT/Off
SELECT
/Off
e
CLEAN
CLEAN
LED (Red)
LED (Red)
DELAy BREW
DELAy BREW
LED (Amber)
LED (Amber)
BREW NOW
BREW NOW
LED (Green)
LED (Green)
a
b
c
d
Your new VillaWare
Coffeemaker
has the following features
BreWing CaPaCitY
BreWing CaPaCitY
– 12 Cups
remoVaBle Filter Basket
remoVaBle Filter Basket
– The filter
basket lifts out for fast and easy cleaning
and filling.
– Can't wait for the
Pause 'n serVe
Pause 'n serVe
coffee to finish brewing? The Pause
'n Serve feature allows you up to 30
seconds to pour a cup of coffee while
the coffeemaker is still brewing. Carefully
remove the decanter and the Pause
'n Serve feature will be automatically
activated, temporarily stopping the flow
of coffee into the decanter.
Water WindoW
Water WindoW
– Show amount of
water in the reservoir for accurate filling.
non-stiCk Warming Plate
non-stiCk Warming Plate
– This
feature allows you to keep your coffee
hot after brewing. The non-stick attribute
prevents the decanter from sticking to the
surface of the warming plate.
– Safely stores excess
Cord storage
Cord storage
cord to keep your countertop neat.
tWo-Hour auto sHut-oFF
tWo-Hour auto sHut-oFF
your coffee hot for two hours, then
automatically shuts off.
ProgrammaBle Controls
ProgrammaBle Controls
CloCk
CloCk
– The clock serves as a handy
kitchen clock and allows you to set the
Delay Brew feature.
– Would you like to wake
delaY BreW
delaY BreW
up to a fresh pot of coffee? The timer
allows you to preset when you would
like the coffeemaker to automatically
begin brewing your coffee, up to 24
hours in advance.
e
sPeCial Cleaning CYCle
sPeCial Cleaning CYCle
you to easily maintain and clean mineral
deposits from your coffeemaker.
note:
If you have selected any of the
operating functions, the coffeemaker will act
upon the last operation selected if the power
is restored within 10 seconds after a power
outage.
how To:
set the Clock
1
Plug the power cord into a standard
electrical outlet. The clock will flash on
the control panel to indicate that the
time has not been set yet.
– keeps
Press and hold the hR
2
(c)
buttons until you reach the current time.
The Am or Pm indicator will light at the
bottom of the display.
The clock is now set!
note:
Pressing any button before setting the
clock will cause the clock to start keeping
time from 06:00 am. you must set the clock if
you want to use the DELAy BREW feature.
set the delay Brew time
While the display is in the clock mode, simply
press the SET DELAy
(d)
button and while the
– Enables
DELAy BREW time is flashing, set the brew
time by pressing the hR and mIN buttons.
The Am or Pm indicator will light at the
bottom of the clock display.
d
Within a few seconds, the display will change
to the current time.
The Delay Brew Time is now set!
note:
To activate the DELAy BREW cycle,
see the "Brewing Coffee Later" section.
To check the programmed time, push the SET
DELAy button. The display will show the time
you have programmed the coffee to brew. If
you press the SET DELAy button again, or wait
a few seconds, the display will switch back.
and mIN
(b)
5
villaware.com
villaware.com

Publicidad

Tabla de contenido
loading

Tabla de contenido