ELSA TanGo 1000 Guia De Instalacion página 10

Installation
Installation under Windows NT
This procedure describes how you install your
Windows NT 4.0.
After connecting the ISDN terminal adapter, restart your computer.
Use your mouse to follow the command sequence Start , Settings , Control
Panel , Modems . In the dialog window "Install New modem", click on Next to
start the modem identification.
identified as standard modem.
Click on Change to select the ISDN terminal adapter. The "Install New
Modem" window will be displayed.
Now click on "Diskette" in the "Install new modem" window.
Click on Browse and access the directory \Driver\Winnt40 on the supplied
CD, select Open and then confirm with OK .
In the dialog window "Install New Modem", select the ISDN terminal adapter
ELSA TanGo 1000 , confirm with OK and then click on Next .
Click on Finish to close the installation.
The ELSA TanGo 1000 can now be operated from Windows NT 4.0. The software
components of Windows NT 4.0, such as HyperTerminal and Dial-up Network, can
make direct use of the ISDN terminal adapter.
Where Do I Find What?
After you have installed the ISDN terminal adapter under your operating system,
you can install the application software.
In the manual...
...you can read up on how to install the software under the various operating
systems. It shows you how you can deal with any problems that might arise, and
describes the operation of your ISDN terminal adapter.
In addition, the manual contains technical data and additional advice for operating
your ISDN terminal adapter.
On the CD...
...you will find not only the software, but also utilities for operating your ISDN
terminal adapter. Each subject has a README file which contains detailed
information about the software concerned. The README files always contain the
most up-to-date information.
For a detailed description of the contents of the CD, just open the README file in
the CD's root directory.
8
ISDN terminal adapter under
The ELSA TanGo 1000
®
4.0
will initially be