Publicidad
Idiomas disponibles
Idiomas disponibles
7 Setting up
Fix the blade unit onto the blender jar. Then connect the power plug of the appli-
ance into a properly installed power socket.
Place the blender jar with the blade unit onto the base unit. Ensure that it engages
properly. Now open the top of the blender jar and put in the desired ingredients.
There is a selector switch with the positions "P", "1" and "2" on the front of the ap-
pliance. The positions "1" and "2" are for the blending speed. The position "P" is for
the "pulsing" function. The pulse function allows tough or frozen ingredients to be
chopped into smaller pieces at high speed. In this way, you can better control the
blending time and the consistency and positively influence the final result. Select
the desired position of the selector switch. The blender will then start to chop the
chosen ingredients into smaller pieces. Adhere to the prescribed operating time.
Do not exceed the blending time under any circumstances. If you wish to blend the
ingredients by pulsing them in stages, move the selector switch repeatedly back
and forth between "P" and "0". This allows you to vary even the pulsing interval.
Then remove the blender jar from the base unit.
Note: The appliance is designed only for brief periods of operation. You have to
allow the appliance to cool down sufficiently after 2-3 minutes of continuous use
before you start again!
8 Cleaning and Maintenance
Unplug the power cord from the outlet. Clean the base unit with a slightly damp-
ened soft cloth. Caution! Do not use liquids to clean the base unit and the power
connections. Do not use any aggressive, strong or abrasive cleaning agents.
You can clean the blender jar, the lid and the blade unit in soapy water. The
blender jar and the lid can also be cleaned in a dishwasher.
To clean the appliance quickly and immediately after use, fill the blender jar with
warm water up to about 60%, add some dishwashing liquid and let the appliance
run briefly. After this, take the blender jar and shake it. Finally, rinse only the
blender jar and the blade unit using clean water until all residues and traces of
the dishwashing liquid are removed.
Allow all parts of the appliance to dry completely.
29
English
Publicidad
