Filling The Device; Charging The Device - voss.pet AB 2 Instrucciones De Uso

INSTRUCTION MANUAL VOSS.PET AB 2

7.2 FILLING THE DEVICE

As soon as LED 2 (5) flashes blue/yellow every 10
seconds, the device must be refilled.
1. Switch off the device.
2. Insert the spray nozzle from above into the
refill port (1) on the device (Fig. 1).
3. To fill the device to the full, press and hold the
spray nozzle to the refill port (1) for approx.
15 seconds.
CAUTION
If spray leaks during the process, realign the spray
nozzle with the refill port.

7.3 CHARGING THE DEVICE

As soon as LED 1 (4) flashes red every 5 seconds, the device
must be charged.
NOTICE
Use the supplied USB cable for charging.
1. Open the flap on the USB
connector (9) and connect
the supplied USB cable to
the device (Fig. 2).
2. Connect the cable to the PC or a charging adapter.
During the charging process, the LED 1 (4) lights up red.
As soon as the charging process is completed, the LED 1 (4) will
light up green.
24548 | 10 | 2020 | V 1
Fig. 1
Fig. 2
23
DE
EN
EN
FR
IT
NL
SV
ES
PL